Siemens Landis LME11.230C2E Control Box BN92070001 (Replaces LME11.230A2)
LME… burner controls are used for the startup and supervision of 1- or 2-stage gas or gas / oil burners in intermittent operation.
The flame is supervised by an ionization probe or flame detector QRA… with ancillary unit AGQ3…A27 for gas / oil forced draft burners or blue–burning flames with blue-flame detectors QRC...
In terms of housing dimensions, the LME... are identical with the LGB… and LMG… burner controls (refer to «Type summary»).
- For gas burners with or without fan to EN 298: 2003
- For gas burners with fans conforming to EN 676
- For oil burners to EN 230: 2005
- Undervoltage detection
- Air pressure supervision with functional check of the air pressure switch during and operation
- Electrical remote reset facility
- Multicolor indication of fault status and operational status messages
- Limitation of the number of repetitions
- Accurate control sequence thanks to digital signal handling
- Controlled intermittent operation after 24 hours of continuous operation
Download PDF