UVZ780 Retrofit Kit (SAT01-RETRO-23)

UVZ780 Retrofit Kit for MMG, TMG & SGU 230v Satronic Controls

UVZ780 Retrofit Kit (SAT01-RETRO-23)

for the replacement UV cell UVZ 780 for use in combustion controls MMG 8xx, TMG 740-3 or SGU 93

The KLC11 conversion kit has been specially composed for the simple replacement of an existing UVZ 780 UV cell and includes a KLC11/230 RA compact UV flame detector approved to EN298 for direct connection to the existing burner control box.

A connection cable, moun-ting flanges and detailed conversion instructions are included for easy installation of the KLC11/230 RA flame detector. The KLC 11 is a compact UV flame detector designed for single flame combustion and produces little light or radiation in the visible spectrum and has a very low flame modulation / flicker frequency.

The design of the UV sensor ensures that the flame detector does not react to background radiation from hot refractory or any other infrared light source. The UV flame detector is equipped with an optical interface that visibly indicates the intensity of the flame signal.

The KLC 11 can be connected directly to the ionisation input of the burner control box. The plug-in solution means that the flame detector can be easily replaced. The internal increase in UV tube voltage immediately after the supply voltage is applied ensures the safety requirements of EN 298 for testing the UV tube for self-ignition.

Download Instructions

Download Datasheet